Air Liquide advanced Technologies in collaboration with Cedrat Technologies and SMAC has performed a study of a compact vibration control platform for mechanical cryocoolers. This solution has been proposed as an alternative approach to cryocooler integration with respect to suspended systems that must be mechanically locked during the launch phase. This system allows significant reduction of the platform’s physical size and mass.
Within the frame of a project called DTP RPA (Développement Technique Probatoire Rotor à Pale Active), also known as Active Blade Concept, carried out in cooperation between ONERA, Eurocopter, DLR and Eurocopter Deutschland, a four-bladed Mach-scaled rotor was tested in December 2005 in ONERA S1 Modane wind-tunnel. The main objective of this test was to validate the concept of using active flaps located on the trailing edge of the blades of the main rotor of a helicopter to decrease the vibration level generated by this rotor.
ABC is the acronym for ‘’Active Blade Concept’’ and represents a 38% Mach scaled model rotor of the Advanced Technology Rotor (ATR) of Eurocopter Germany (ECD, ). In contrast to the ATR the model rotor is fully articulated. Specifically, it is equipped with a flap at the trailing edge of each blade, which is driven by a piezoelectric actuator. The ABC project is a cooperation between the French ONERA and the German DLR within the research concept ‘’The Active Rotor’’.
Actuators are key elements of air- and spacecrafts. In the recent years the concept of the more-electric aircraft pushed the development of electrical actuation systems to substitute hitherto used hydraulic actuators in a broad range of applications such as flight control, landing gear and brake actuation.
In the context of a more electrical aircraft, in order to explore the feasibility of non usual solutions, electro-fluidic components based on smart materials and new Electro-Hydraulic-Actuators (EHA) concepts, based on active valves and magnetostrictive vibrating pump, have been studied. Active valves based on different magnetostrictive and piezoelectric actuators have been designed, realised, tested and compared. The magnetostrictive version uses a new Amplified Magnetostrictive Actuator (AMA) based on a stack of Giant Magnetostrictive Materials (GMM) and placed inside an elliptical amplification ring.
Amplified Piezo Actuators have been developed at CEDRAT TECHNOLOGIES for several years. Their well – known advantages (rapid response and precise positioning) have been used in valve designs to obtain both rapid or fine proportional valves.
Our products catalogue is available !Download it