CEDRAT TECHNOLOGIES proposes two types of solution for driving and controlling piezo actuators:
Rack-based electronics from CEDRAT TECHNOLOGIES are highly-reliable versatile solutions dedicated to drive and control piezo actuators from CEDRAT TECHNOLOGIES in the -20 +150V voltage range. They can be configured to meet very various requirements: very low noise, ultra-high power, large number of channels, open or close loop control…
To build a rack-based electronics, a powered rack should be selected as a starting point.
A powered rack is a rack equipped with an AC-DC converter. This converter is required to supply different boards such as amplifier boards (for driving actuators), sensor boards (for conditioning sensors), controllers (for close loop control and communication).
Powered rack can be selected according to different criteria :
- Size : RK84F rack can welcome much more boards the RK42F rack
- Power : Racks are pre-equipped with various converters :
Main standard powered racks are listed below. Other configurations can be defined under request. Please contact CEDRAT TECHNOLOGIES to help you in building your rack-based solution.
For driving and controlling piezo actuators between -20 and 150V the powered benchtop case RK42F3U-LC75B solution includes a RK42F3U case and an AC-DC converter LC75B.
Max current = 0.75A; Max driver/conditionner boards = 2
Standard
For driving and controlling piezo actuators between -20 and 150V the powered benchtop case RK42F4U-LC75C solution includes a RK42F4U case and an AC-DC converter board LC75C.
Max current = 2.55A; Max driver board = 1; Max sensor board = 1
Standard
For driving and controlling piezo actuators between -20 and 150V the powered subrack RK84F4U-1LC75B solution includes a 19'' RK84F4U subrack and an AC-DC converter board LC75B. The solution offered is ready for cabinet integration.
Max current = 0.75A; Max driver/conditionner boards = 6
Standard
For driving and controlling piezo actuators between -20 and 150V the powered subrack RK84F4U-1LC75C solution includes a 19''RK84F4U subrack and an AC-DC converter board LC75C. The solution offered is ready for cabinet integration.
Max current = 2.55A; Max driver/conditionner boards = 6
Standard
For driving and controlling piezo actuators between -20 and 150V the powered subrack RK84F4U-2LC75C solution includes a 19''RK84F4U subrack and 2 AC-DC converter boards LC75C. The solution offered is ready for cabinet integration.
Max current = 5.1A; Max driver boards = 2; Max conditionner boards = 2
Standard
For driving and controlling piezo actuators between -20 and 150V the powered subrack RK84F4U-1SC75 solution includes a 19'' RK84F4U subrack and a switching converter board SC75. The solution offered is ready for cabinet integration.
Max current = 20A; Max driver board = 1; Max conditionner board = 1
Standard
Our products catalogue is available !
Download it
RK42F3U-LC75B.pdf