The position eddy current sensors are contactless sensors made of a probe with an associated conditioner.
The Eddy Current Probe is a contactless sensor used to measure distance with a nanometric precision. Two ECP probes are available to address different strokes.
The Eddy Current Sensor conditioners manage the signal from the Eddy current probe ECP:
The gain of each channel is generally calibrated when the Eddy Current probe is embedded in the environment.
The ECP1000 Eddy Current Probe is a contactless sensor able to measure the distance on a range of 1000um. Possibility of extended range up to 2000um.
Nominal range 1000um; Resolution (BW=1kHz) 0,003% Full Range
Straight/Right angle cable packages.
The ECS75 Eddy current probe conditioner is implemented on a 19'board and can include up to 3 independent channels. The gain of each channel is generally set when the Eddy Current Sensor is embedded in the Piezo Mechanism.
Output voltage -10/+10; Resolution: 0.003% of Full Range; Output bandwidth (KHz):20; Thermal drift <0.05% FS/°C; Number of channels: 1...3;
The ECS45 eddy current probe Conditioner is an OEM version integrated in a rack 12F supplied by an external DC power supply.
Supply voltage 24VDC ; Output voltage -10/+10; Resolution: 0.003% of Full Range; Output bandwidth (KHz):20; Thermal drift <0.05% FS/°C; Number of channel: 1...3;
The OEM Eddy Current Probe conditioner ECSu10 is a cost effective conditioner. It is built around an input analogue stage without the linearization.
Supply voltage 15VDC ; Output voltage 0/+10; Resolution: 0.005% of Full Range; Output bandwidth (KHz):15; Thermal drift = 0.2% FS/°C; Differential measurements / Synchronization of sensors / PCB mounting with 1.27 pitch for right pins connectors/ Comparator output