CTEC and F4E have improved and pre-qualified a MSPA piezo motor, based on a secret material and able to operate in vacuum,, non-magnetic or high temperature and sustain radiations. Its high reliability, precision and operating lifetime makes this new piezo motor perfectly suitable for space, healthcare and nuclear applications.
Many applications and more specifically space projects show need for a stable sub-micrometre positioning actuator. In order to meet this need, Cedrat Technologies has designed the new FSPA brand. This linear stepping actuator offers sub-micrometric positioning resolution along 5mm stroke combined with high actuation force (>100N) and the ability to hold its position without power. The IASI-NG instrument is one of the key payload on-board METOP-SG which is a new meteorological satellite for Europe. The instrument is based on a Mertz interferometer and requires a very precise positioning of an optical blade used to separate the interferometer’s branches. A dedicated version of the FSPA, the Beam Splitter Mechanisms Actuator (BSMA) is then developed to achieve this nanometric positioning which is a key parameter for the overall instrument performance. This paper firsts present the internals of both FSPA and BSMA actuators. Major design differences and their respective impact on the resulting performances are detailed. Results from the acceptance and qualification test campaigns are also presented.
A reed valve compressor technology for future science spacecraft application, is being developed by CEDRAT TECHNOLOGIES (CTEC), based on the very compact and high-power MICA300CM actuator (Moving Iron Controllable Actuator). The present publication details the compressor breadboard design and test results, manufactured in the frame of an ESA Technological Research Program (TRP), for the testing of a Zero Boil Off Hydrogen storage demonstrator. The test results presented have been realized at compressor level with Helium gas at CTEC facilities, and the full 20K Hydrogen storage demonstrator is soon to be tested.
Modular Stepping Piezoelectric Actuators (MSPA) are inertial motors working under the stick-slip principle . The advantages of rotary MSPA are unlimited stroke, torque at rest, high resolution, nonmagnetic and vacuum compatibility. This paper presents the new MSPA developments regarding rotary motion at Cedrat Technologies for macro and micro sizes MSPA. These progresses follow the previous technical investigations around noise reduction, miniaturization at low voltage and the integration of MSPA modules . In this paper two rotary piezo motors are presented: The first one is a macro size MSPA based on APA40SM. It is developed to work under nuclear environment: operational temperature up to 70 degrees, vacuum, 5 Tesla magnetic field and high radiation fields (3,5 kGy/hour gamma radiation power and 500 Mn/(cm².second) neutron radiation power). The second is a micro size MSPA based on APA30uXS. This motor is used for embedded application such as nonmagnetic shutter.
High Power Synthetic Jet Actuator (SJA) based on compact piezoelectric actuators, have been developed and tested by CEDRAT TECHNOLOGIES (CTEC) and ONERA, under French National funding RAPID from DGA. This publication presents the modelling approach with early breadboarding results, the final design chosen for integration onto an aircraft airfoil mock-up, the performance test results on the SJA device prior integration, and the final aerodynamic performance test demonstration achieved at ONERA wind tunnel test facility.
In many in-situ instruments information about the mass of the sample could aid in the interpretation of the data and portioning instruments might require an accurate sizing of the sample mass before dispensing the sample. In addition, on potential sample return missions a method to directly assess the captured sample size would be required to determine if the sampler could return or needs to continue attempting to acquire sample.
This paper presents a piezoelectric motor which provides linear motion and very high resolution (40 nm steps). First, the space application (IASI-NG instrument onboard METOP-SG satellite) and associated performance requirements are presented. The internal architecture of the motor and its main components are then explained. A first focus is done on the experimental verification of the threaded interface lifetime which is a key element of the mechanism. A second focus is on the nanometric position test bench. Achieved results are provided for resolution, motion quality and position stability. Finally, results from the vibration test campaign are presented