The Fast Piezo shutter developped by CEDRAT TECHNOLOGIES in collaboration with EMBL (Dr. Cipriani) is based on standard amplified piezo actuators with a special optical head. It provides a compact and low jitter shutter solution for X ray beam.

Max beam diameter (mm): 0.30; Aperture & closing time (ms): 2

Strain Gauges; Vacuum; SIW option

Standard

The FPS400M (derived from FPS200M) is based on standard amplified piezo actuators APA 400M with a special optical head. The FPS400M is a compact, low jitter and high stroke shutter solution.

Max. beam diameter (mm): 0.70; Aperture & Closing time (ms): 4

Strain Gauges, Vacuum, SIW option

Standard

The FPS900M (derived from FPS200M and 400M) is based on standard amplified piezo actuators APA 900M with a special optical head. The FPS 900M is a compact, low jitter and high stroke shutter solution.

Max beam diameter (mm): 1.1; Aperture & closing time (ms): 10

Strain Gauges, Vacuum

Standard

The FAPS400M is a fast shutter solution for X-Ray beamline with large aperture / stroke capability (> 3mm) and short response time (< 8 ms). It is based on two APA400M® each one connected to and actuating a mechanical amplifier or a lever arm.

Max beam diameter (mm) 3; Aperture & closing time (ms) 8

Vacuum (VAC)-Ultra High Vacuum (UHV)-Strain Gauge sensor (SG)

Standard

CTEC has developed a fully integrated solution for FPS and FAPS products in Vacuum Environments. The Shutter is mounted inside the Box with vacuum cable feedtrought. The shutter can be unmounted and mounted again without removing the Vacuum Box from the beamline.

Vacuum box with KF40 interface

Standard